Garage Door Opener Repair
Bimini, FL

This is usually caused by one of three things: a broken spring (the opener can't lift the dead weight of the door), a stripped drive gear inside the opener, or a failed logic board. We diagnose which component is at fault and repair it on the spot.

This almost always points to a photo-eye sensor problem. The sensors may be misaligned, dirty, or have a wiring fault. It can also be caused by incorrect force or limit settings. We realign sensors, test the beam, and calibrate the limits.

Usually not. Remote issues are most often caused by dead batteries, a failed RF receiver board in the opener, deprogrammed memory, or RF interference from LED lights in the area. We diagnose the exact cause — most remote failures are fixed without replacing the opener.

Yes. LiftMaster and Chamberlain are the most common brands we service. We carry logic boards, gear kits, sensors, and remotes compatible with their full lineup of residential and commercial openers.

Grinding typically indicates a worn or stripped drive gear, lack of lubrication on the rail and drive, or a failing motor bearing. We identify the source and replace only what's worn — quieting the opener and extending its life.

Yes — this is a real and common issue. Some LED bulbs emit RF interference that disrupts opener receivers and HomeLink systems. We can diagnose interference issues and recommend compatible, opener-safe LED bulbs.

Repair costs vary based on the component that has failed. Minor repairs (sensors, remote reprogramming) are very affordable. Full logic board or motor replacement costs more but is still far less than a full opener replacement. We provide a free, itemized estimate before any work begins.

We give you an honest recommendation based on the opener's age, repair cost, and available parts. If your opener is under 10 years old, repair is almost always the better value. If it's older or requires a costly board replacement, we'll show you both options so you can decide.